OBD2 Cable and Connector

VVDI Prog Bosch Adapter Read BMW ECU N20 N55 B38 ISN Without OpeningSupport BMW N20/N55/B38+Add ME17.5.22(TC1724)(ADAPTER),MEVD17.2.4_Exx(N20)(ADAPTER),MEVD17.2.4_Exx(N20)(ADAPTER),MEVD17.2.4_Fxx(N20)(ADAPTER),MEVD17.2.9_Fxx(N20)(ADAPTER),MEVD17.2.9_Exx(N20)(ADAPTER),MED17.5.25(TC1782)(ADAPTER),MED17_5_22(TC1782)(ADAPTER),MEVD17_2_3(B38)(ADAPTER),MEVD17_2_K(B38)(ADAPTER),MEVD17.2.5(ADAPTER),MEVD17.2.8(ADAPTER),MEVD17.2.H(ADAPTER),MEVD17.2.P_Fxx(N20)(ADAPTER),MEVD17.2_Fxx(N55)(ADAPTER),MEVD17.2.G(N55)(ADAPTER),MEVD17.2.6(N55)(ADAPTER)options in

VVDI VAG Vehicle Diagnostic Interface 5th IMMO Update ToolFunction: VVDI VAG Vehicle Diagnostic Interface 5th IMMO Update Tool works together with VVDI, use immoplus 11.0 software, you can use VVDI for 5th generation immobiliser function.Without this tool, VVDI can only do till 4th immo.You need to update your VVDI firmware, so that it will be compatible with the newest software immoplus 11.6.QC Mark: Package List:1pc x VVDI 5th IMMO Update

PCF79XX Adapter for VVDI PROG 1. Supported Chip Models: PCF7922 PCF7941 PCF7945 PCF7952 PCF7953 PCF7961 2. Two Optional Ways to Read Write PCF79XX Chip (1) Remove the chip and put it in the IC socket, select option “PCF79XX chip” shown as follows. (2) Connect wire to the circuit board, select option “PCF79XX adapter” shown as follows. Note: If PCF79XX adapter option can't recognize chip due to the affection of circuit board, just remove chip and put it in IC socket, then use option “PCF79XX chip” to operate.  3.VVDI Pro Options

XHORSE ELV Emulator for Benz 204 207 212 with VVDI MB toolHow to tell if the ESL is damaged or NEC is locked? Open VVDI MB Tool software, Click “Check ESL damage” and you will get any of following display: ESL is working: means the motor is damaged and you need a new full set of ESL motor.ESL is damaged: need to replace new ESL. How to replace ESL with VVDI MB BGA Tool?Step1. Erase EIS, then re-write EIS and personalize ESL, finally ESL is synchronized. Note: if you not erase ESL at first, but only personalize ESL, the ESL won’t be synchronized.   To

Xhorse XDPG14CH MC68HC05X32(QFP64) Adapter for VVDI PROGPackage Including:1pc x Xhorse XDPG14CH MC68HC05X32(QFP64) Adapter for VVDI

Xhorse VVDI MB BGA TOOL BENZ Infrared Adapter Package including: 1pc x  Xhorse VVDI MB BGA TOOL BENZ Infrared

Xhorse XDPG15CH MC68HC05BX(PLCC52) Adapter for VVDI PROGPackage Including:1pc x Xhorse XDPG15CH MC68HC05BX(PLCC52) Adapter for VVDI

Xhorse VVDI Toyota 8A Non-smart All Keys Lost AdapterWork for Toyota 8A H chip (non-smart) All keys lost from year 2014 to 2019, without disassembling Immibilizer boxSupports VVDI2, Key Tool Max+ Mini OBD ToolToyota 8A Non-smart Key Car Models:Levin, Corolla, Rav4, Prado, Land Cruiser,Camry, Highlander, Reiz, Sienna. 

OBDSTAR Convertor for Re nault Talisman/Megane IV/Scenic IV/Espace V to Make Dealer Key Work with P001 Adapter 1. This is covertor to make dealer key for Re nault Talisman/Megane IV/Scenic IV/Espace V. 2. Have to Work with P001 AdapterNotice: OBDSTAR X300 DP Plus has P001 in default package, so they can work together directly.If you bought P001 with your OBDSTAR X300 DP, then they can work together too.Packing List:1pc x OBDSTAR

OBDSTAR FCA 12+8 UNIVERSAL ADAPTER for OBDSTAR X300DP or X300DP PLUSFCA 12+8 ADAPTER Functions:1. Used in key programming and cluster calibration via OBDII2. Used with other diagnostic devices to read and clear fault codeDevelopment Background:Vehicles are equipped with sgw safety gateway modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner.The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.How to Use FCA 12+8:Locate and unplug the 12pin and 8PIN connectors of the SGW module, then connect the FCA 12+8

OBDSTAR OBD2 16Pin Connector for OBDSTAR X300 DP and X300 PRO3 Key MasterWorks together with OBDSTAR X300 DP and X300 PRO3 Key Master. It is only an OBD2 16Pin connector and can not be used alone.So if your original OBD2 16pin connector is lost or damaged, you could order this high-quality connector made by OBDSTAR Company.Package includes: 1pc x OBDSTAR OBD2 16Pin

OBDSTAR Main Test Cable for OBDSTAR X300 DP and X300 PRO3 Key MasterWorks together with OBDSTAR X300 DP and X300 PRO3 Key Master. It is only a Main Test Cable and can not be used alone.So if your original OBDSTAR Main Test Cable  is lost or damaged, you could order this alone, it is made by OBDSTAR Company.Package includes: 1pc x OBDSTAR Main Test

Multifunctional Jumper for OBDSTAR X300 DP Plus/X300 Pro4 Package includes: 1pc x Multifunctional Jumper for OBDSTAR X300 DP Plus/X300 Pro4

Main Test Cable for XTOOL X-100 PAD2/PAD2 ProThis is main test cable for XTOOL X-100 PAD2/PAD2 Pro. Package includes: 1pc x Main Test Cable for XTOOL X-100 PAD2/PAD2 Pro 

H-ONDA HDS Cable OBD2 Diagnostic CableSupported Languages: English/ Chinese/ Spanish/ French/ Korean/ Portuguese/ IndonesianOperating System: Windows XP SP3Update: Via CDHDS Diagnostic Cable Function:Supports most 1996 and newer vehicles with OBDII/DLC3 diagnosticsSupport Honda HDS OEM diagnostic softwareSupports Diagnostics and Active testsEasy to install and carryCost-effectiveHigh performance with ARM chip insideStatus LEDHDS Diagnostic Cable Specification:1.ConstructionDiagnostic Interface:16 PINUSB Interface: USB 2.0Power: DC 5 V - 36 VConsumption: 0.3

EIS/ELV Test Line for Mercedes (Without Having To Get On the Car) Work Together With VVDI MB BGA TOOL and CGDI Prog MBMercedes Locks Platform Test Line for W204 W212 W221 W164 W166 Scope of Application: The EIS ELV maintenanceKey programmerDetection keyFAQ:Q: What is the difference between SF205 and SF205-B?A: Now SF205 add these two cables: Gear lever ECU Refresh Diagnostic Cable and Gearbox ECU Refresh Diagnostic Cable, but SF205-B do not have these two cables, other functions are the same, if you do not need these cables, you can choose SF205-B with

{{item.prod_desc}}